Tramex

Tramex Water Damage Restoration Inspection Kit

Price €1,100.00

Detection & InspectionDetection & SafetyMoisture Meters Tramex Water Damage Restoration Inspection Kit

Price €1,100.00
Incl. VAT €1,353.00
- +
In Stock

TramexMoistureInspection Kit

Contents Videos

TramexMoistureInspection Kit

A complete kit for finding and measuring moisture in concrete, wood and wood by-products, giving comparative readings inmost other building materials. Featuring the Tramex MEP allowing for non-invasive testing of moisture conditions innumerous building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. The TramexCMEX II digital moisture meter allows the user to non-invasively test concrete to international standards. Using the CMEX IIand Hygro-i probe the user can test relative humidity, temperature, dew point and mixing ratio in the environment, or
perform in situ and hood testing (with optional hood) of relative humidity in concrete to international standards BS 8201,BS 8203 or BS 5325 & ASTM F2170. A heavy-duty pin-probe measures moisture content in wood, and gives in-depthreadings of the moisture condition of walls and roofing insulation when using the 180mm insulated pins. The Water DamageRestoration Inspection Kit comes in a protective heavy-duty carrying case with die-cut foam lining.

FEATURES OF MEP
-Wide range of moisture content readings for wood from 5% to 30%.
-Deep signal penetration, up to 30mm (1.25") in wood and drywall,detects elevated moisture through most covering materials withouthaving to damage or puncture the materials being tested.
-Three ranges of sensitivity: Wood & Timber / Drywall & Roofing /Plaster & Brick making it ideal for testing various building materials.

FEATURES OF CMEX II

-Measures up to 6.9% Moisture Content in Concrete.
-Carbide Method (CM) equivalent scale for concrete.
-Hold function freezes meter reading when inspecting areas where the meterface is not visible.
-Attaches to a relative humidity Hygro-i probe for in situ testing of concreteand ambient conditions of relative humidity, temperature, dew point and mixingratio, all shown simultaneously on one clear display.
-Attaches to Pin-type probe to give 7% to 40% Moisture Content
measurement in wood and comparative readings in most other building materials.



What does this add up to? Reduced work downtime, thus translate into higher productivity, resulting in reliability and accuracy at an extremely reasonable price. Test one for yourself at LES today.

DEPTH OF PENETRATION IN CONCRETE(NDT*)
approx. 20 mm

MOISTURE CONTENT FOR CONCRETE(NDT*)
0 to 6.9 %
CARBIDE METHOD EQUIVALENT FOR CONCRETE(NDT*)
0 to 4.3
REFERENCE SCALE(NDT*)
‚ 0 to 100
MOISTURE CONTENT IN WOOD USING PIN PROBE
‚ 7 to 40%

RELATIVE HUMIDITY(with Hygro-i probe)
‚ 0 to 99%
HUMIDITY ACCURACY
‚ 10% to 90%RH +/-1.8% @ 25C / 77F
*NDT - Non-destructive Test

MEASURING RANGE - MEP

DEPTH OF PENETRATION IN CONCRETE(NDT*)
‚ 30mm
MOISTURE CONTENT IN WOOD
‚ 5 to 30 %

REFERENCE SCALE FOR BUILDING MATERIALS
‚ 0 to100


  • 1. MEP Non-invasive moisture meter for general building materials.
    2. CMEX II - concrete moisture and humidity meter.
    3. Hygro-i probe.
    4. 8 x RH Sleeves.
    5. Heavy-duty pin-type wood probe.
    6. 180mm (7") insulated pins for in-depth penetration.
    7. Infrared thermometer.

    You May Also Like